This option adds 1 measurement axis (Z-axis) to the Multipurpose measuring table. Useful for
measuring lift and downforce.
This option adds 2 measurement axis (total of 3 axis, XYZ-axis) to the Multipurpose measuring
This option adds 5 measurement axis (total of 6 axis, XYZ-axis, roll, pitch, yaw axis) to
the Multipurpose measuring table. The measurement area is 400mm×400mm in the middle of
the top plate. The rated load is 5000N (vertical direction), making it tough enough to
have a person jump on the sensor. It comes with a special software.
|Measurement Area Size||400×400 mm|
|Rated Load||Fx, Fy：±2500 N (horizontal direction)|
|Fz：+5000 N (vertical direction)|
|Mx, My, Mz：± 500 Nm|
This option upgrades the Multipurpose measuring table included in the wind tunnel set (Aero
Optim-B,S,X) to Bicycle measuring table or Wheelchair/Tricycle measuring table.
This option adds a motor and a rotary encoder in the Bicycle measuring table or
Wheelchair/Tricycle measuring table. By selecting the autorotation motor option, the wheels
can be rotated at a set rotation speed. The maximum wheel rotation speed is 55km/h. Using
this function, you can test the performance of bicycle wheels and tires.
This option adds a loading device in the roller unit in the Bicycle measuring table or
Wheelchair/Tricycle measuring table. The maximum load is 2000W. The loading device can be
connected to a smartphone by Bluetooth. The load can be adjusted from a Smart phone